FABRIC EXPANDER ADJUSTMENT
A/ BACK GROUND
A, Un-expanded fabric cause fabric problem
Mis-adjust expanding device will cause fabric edges could not be expanded completely before goes inside the Rinsing box or washer, thus sometimes crease marks occurred to sensitive fabric
Key points of mis-adjust of expanding device:
1, Roller installation
2, Rotation of rollers
3, Angle between two Rollers
4, Fabric Tension adjustment
B1, ARROW OF SCREW ROLLER SHOULD BE ACCORDING TO THIS PHOTO
B.1, Installation of Screw Rollers: MAKE SURE THE UPPER AND LOWER ROLLER SHOULD BE INSTALLED AS PER LEFT PHOTO.
B2, Obtain Expanding Angle for expanding
B.2. Adjust the horizontal position of Screw Roller to
obtain Expanding Angle for efficiency of the screw
B3, Rotation of Screw Rollers.
B.3. Rotation of Rollers: make sure the rotation
of roller should be as per photo, if rotation is not correct,
please change the wire direction of motors.
C, LOAD FABRIC
LOAD FABRIC AS PER THIS DRAWING AND OBTAIN THE TENSION BY INSTALL ROLLER CORRECT AS SHOWING IN B.2.